A Detailed Explanation Of Full Polished Glaze

      The type of brick with clay and stone powder by pressing machine, and then fired into, the front and back color consistent, not glaze, after burning, surface polishing treatment, so that the front is very smooth, very beautiful, the back is the original brick. Advantages: After polishing process, the original stone was polished clean, more transparent like a mirror. Full Polished Glaze
      Use polished tiles to make the whole space look brighter. Shortcomings: Polished tiles because of smooth, so it is not slippery, that is, once the ground has water, it is very slippery, which is why everyone see the building inside the general staircase, such as the stone is not thrown into the light, but the Matt, only so to prevent slippery. At the same time, the poor polishing brick liquid easily penetrate, not easy to wipe.Full Polished Glaze
      As the name suggests, is the surface with glaze fired together, the main body and clay and clay two kinds of clay fired out of the back is red, called magnetic brick; Clay fired on the back of the gray-white, called tile. Usually porcelain clay is fired out of good effect, so good bricks are called tiles rather than tile. Advantages: Glazed tile surface can do a variety of patterns and patterns, than polished brick color and rich patterns, because the surface is glaze, so wear-resistant as polished bricks. Disadvantages: Thermal expansion and contraction prone to cracking, the bulk density is too loose, cement sewage will penetrate to the surface.
     Ball Mill: Grinding, so that the raw materials reach a certain degree of fineness, the process of homogeneous composition, at the same time, in order to promote the ball milling, the ball milling process should be added about 34%~37% water for sand mixture; spray granulation: Full Polished Glaze
     Principle-the full convection of 600 ℃ hot air and upward-sprayed mud in a spray drying tower For drying, granulation, the formation of hollow raw material particles (the real production of raw materials), to ensure the suppression of the formation of raw materials in a favorable combination; into the powder silo (raw material stale): raw materials into the silo natural placement of about 48 hours, to ensure that the raw material moisture content uniformity and physical and chemical properties of Full Polished Glaze