Polished Vetrosa Principle

            Fire polishing: The use of flame to soften the surface of glass and the impact of fire on glass, can solve some of the surface of the glass products, but the treatment of the surface roughness of the glass will be reduced. The general hollow vessel Glass after cutting the mouth of the relatively coarse can be used to polish this method. Applicable material glass: sodium-calcium glass, high-jump silicon glass Negative effects: easy to fry.Polished Vetrosa

            Polishing Powder Polishing: The use of polishing powder on the glass surface of high-speed friction to remove scratches, sassafras and so on, to maximize the transparency of glass and refraction effect!!! Before polishing to the polished part of the abrasive belt sanding, pure plane application of more than 400 mesh emery grinding. This kind of polishing method uses the tool and the material many, but the effect best still is the wool wheel + cerium oxide (common names: Rare earth polishing powder) regarding the manufacture and the use of the machine not to narrate in this detail, the suitable material glass: most glass products, the negative effect: relatively slow.Polished Vetrosa

            Acid polishing: The use of acid on the glass corrosion effect of glass surface treatment, before polishing also need to use the surface of the glass abrasive belt polishing, because the acid polishing can reduce the thickness of the glass a lot, but does not necessarily be able to remove all the lines of the glass. Its formula varies according to the glass material. This method is very dangerous! Non-professionals and companies with complete equipment do not recommend personal testing. Applicable material glass: any glass (but the effect of polishing is determined by the glass material itself) Negative effect: Smoothness is not good control, the glass products of the consumes.Polished Vetrosa