The Detailed Steps And Methods Of Polished Vetrosa

Polished glass using the flame on the glass surface softening and the impact of fire on the glass, glass products can solve some of the surface but the surface of the glass after the treatment of flatness will be reduced.General hollow glass cut after the mouth is rough Method of polishing. Applicable material glass: soda lime glass, high jump glass, negative effects: easy to fry.Polished Vetrosa

Method 2: Polishing powder polishing, the use of polishing powder on the glass surface of the high-speed friction to remove scratches, sassafras, etc., to maximize the glass to improve the light transmission and refraction! In the polishing before the first part of the polished Belt grinding, pure plane application 400 mesh or more grinding sand polished grinding. This kind of polishing method uses a lot of tools and materials, but the best effect is wool wheel + cerium oxide (common name: rare earth polishing powder) on the production and use of machinery is not described here, the applicable material glass: the vast majority Glass products, negative effects: relatively slow.Polished Vetrosa

Method 3: Acid polishing The use of acid on the glass corrosion of the glass surface treatment, polished before the same need to use the surface of the glass belt grinding, because the acid polishing can reduce the thickness of the glass a lot, but not necessarily all of the The pattern of glass is removed and its formula varies depending on the material of the glass. Applicable material glass: any glass (but the effect of polishing by the glass material itself), the negative effect: smoothness is not good control, the glass products have a certain loss of water chestnut.Polished Vetrosa